AIRCRAFT ELECTRICIAN (AIRCRAFT PNEUDRAULIC SYS MECH) with Security Clearance
Department of Defense Los Angeles
Duties The primary purpose of this position is:
More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
Comprehensive knowledge of environmental principles in order to recognize types and functions of valves, ducting, heat, exchangers, turbines, and pressurization system components.
Ability to apply technical practices in the performance of assigned work.
Work schedule will be aligned to allow the incumbent to fully participate in unit training assemblies.
The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities.
Drug testing is a condition of employment.
Heavy carrying (40 lbs).
Reaching above the shoulder.
Use of fingers.
Both hands required.
Hours of walking are approximately 4 hours/day.
Hours of standing are approximately 4 hours/day.
Hours of repeated bending are approximately 4 hours/day.
Climbing, use of legs and arms.
Both legs required.
Operation of special purpose and/or motor vehicles.
Near vision correctable at 13 inches to 16 inches to Jaeger I to 4.
Far vision correctable in one eye to 20/20 and 20/40 in the other.
Depth perception.
Ability to distinguish basic colors.
Ability to distinguish shades of color.
Hearing (with or without aid permitted).
Must work in confined areas and in awkward positions.
Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, hazardous fluids, particulates, and gases).
Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, explosive hazards and Low Observable (LO).
Subject to eye damage due to exposure to LASERs.
Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces.
Slippery or uneven walking surfaces.
Working around machinery with moving parts.
Working around moving objects or vehicles.
May be exposed to intake suction and hot exhaust blast.
- to serve as an Air Reserve Technician (ART) involved in the installing, troubleshooting, interrogating, programing/reprograming, adjusting, testing, modifying, calibrating, and repairing of complex integrated aircraft electrical and environmental systems and equipment on board conventional/nuclear certified aircraft supported by the organization and to provide training to and evaluation of all assigned personnel, e.g., Active Duty, Reservist, Civilians, Contractors and foreign military as required in the accomplishment of duties set forth herein. DUTIES: 1. Performs troubleshooting of complex integrated electrical/environmental systems of related on/off equipment for assigned and/or transient aircraft to include support equipment. 2.
- skid systems, landing gear, ignition, stall warning, flight control, AC/DC power supply and distribution, Integrated Drive Generator, fuel and explosive systems.
- Performs final functional and operational tests of complex integrated electrical/ environmental systems, both on and off equipment.
- Prepares/executes effective training plans to maximize training for all assigned personnel, e.g., Active Duty, Reservist, Civilians, Contractors and foreign military.
- Utilizes safety practices and tool control procedures following established safety rules and regulations to maintain a safe and clean work area.
- U.S. Citizenship Required
- Males must be registered for Selective Service, see www.sss.gov
- A security clearance may be required
- If authorized, PCS may be paid IAW JTR and AF Regulations.
More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
- This posn is subject to provisions of the DoD Priority Placement Program
- Position may be subject to random drug testing
- Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
- Shift work and emergency overtime may be required
- Employee must maintain current certifications
- Disclosure of Political Appointments
- Must be a current member of the AF Reserve or willing/qualified to join
- Advance in hire may be authorized if there is demonstrable proof provided on your resume
- Direct Deposit: All federal employees are required to have direct deposit.
- Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
- Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
- AFSC: 2A676/E-7 Qualifications In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C for WG-2800 Electrical Installation And Maintenance Family QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for theWG-2800 Electrical Installation And Maintenance Family.
Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying.
Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.The screen out element for this position is the ability to perform the work of an AIRCRAFT ELECTRICIAN (AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC) with little to no supervision.
JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:- Knowledge of assigned shop, trade, and housekeeping practices.
- Comprehensive knowledge of electronic/electrical theories, principles, circuitry and practices of one or more complex integrated systems and their relationships.
Comprehensive knowledge of environmental principles in order to recognize types and functions of valves, ducting, heat, exchangers, turbines, and pressurization system components.
- Comprehensive knowledge of and skill in testing, troubleshooting techniques and procedures utilizing a variety of test devices.
- Skill in removing, installing, relocating, and repositioning electrical, environmental, and electronic components to facilitate removal/installation of equipment.
- Ability to lay-out connecting circuits and make connections in order to prevent equipment malfunction or circuit overload.
Ability to apply technical practices in the performance of assigned work.
- Knowledge of safety and security requirements as outlined in applicable standards, regulations and technical orders.
Knowledge of USAF Technical Order Program and its procedures.
OTHER SIGNIFICANT FACTS:- This is an Air Reserve Technician (ART) enlisted position.
Work schedule will be aligned to allow the incumbent to fully participate in unit training assemblies.
The incumbent's regular assignments are primarily ART duties; however, the incumbent may also be assigned non-ART duties, generally not to exceed 30 percent of total responsibilities.
- Drug Test requirement was modified with AFI 90-508, Air Force Civilian Drug Demand Reduction Program, 28 August 2014; Certified Current 18 December 2015 which supersedes AFI 44-107, 7 April 2010.
Drug testing is a condition of employment.
- The incumbent may be required to fly in military and/or commercial aircraft to perform temporary duty assignments (TDY) away from the normal duty station.
- The incumbent may be required to work overtime to meet workload demands.
- Performs other duties as assigned.
FUNCTIONAL REQUIREMENTS: Heavy lifting (up to 40 lbs).
Two man lift for items exceeding 40 lbs.Heavy carrying (40 lbs).
Reaching above the shoulder.
Use of fingers.
Both hands required.
Hours of walking are approximately 4 hours/day.
Hours of standing are approximately 4 hours/day.
Hours of repeated bending are approximately 4 hours/day.
Climbing, use of legs and arms.
Both legs required.
Operation of special purpose and/or motor vehicles.
Near vision correctable at 13 inches to 16 inches to Jaeger I to 4.
Far vision correctable in one eye to 20/20 and 20/40 in the other.
Depth perception.
Ability to distinguish basic colors.
Ability to distinguish shades of color.
Hearing (with or without aid permitted).
If it can be otherwise accommodated, a specific physical condition or impairment will not automatically disqualify a candidate.
ENVIRONMENTAL FACTORS: Work is performed in hangar areas, outdoors, in/on aircraft, and sometimes in hazardous noise areas.
Exposed to extremes in heat, cold, humidity and inclement weather.Must work in confined areas and in awkward positions.
Exposed to bodily fluids, dirt, grease, and aircraft fluids (oil, hydraulic, fuel, sealants, solvents, hazardous fluids, particulates, and gases).
Potentially exposed to Hydrazine, Halon, and/or composites, electrical shocks, RF radiation, explosive hazards and Low Observable (LO).
Subject to eye damage due to exposure to LASERs.
Subject to cuts, bruises, muscle strain, and injury from falls off scaffolds, ladders, and aircraft surfaces.
Slippery or uneven walking surfaces.
Working around machinery with moving parts.
Working around moving objects or vehicles.
May be exposed to intake suction and hot exhaust blast.
Working closely with others or working alone.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work.
You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social).
Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that transl
22nd Century Technologies, Inc.Los Angeles
Job Title: Product Repair/Modification Technician C Location: NAS North Island, CA 92135
Duration: 12 Months assignment with possible extension
Shift Schedule: 6:00 AM- 2:30 PM
Requested Security Clearance: Secret Position Responsibilities:
• CMV-22...
InDyneLos Angeles
extended hours/shifts or weekends. C.Security Clearance: * Currently hold or be able to obtain and maintain the proper US DoD issued security clearance, which requires US Citizenship. Security clearance eligibility may be discussed during the interview...
L3Harris TechnologiesLos Angeles
of aircraft on flight line. Perform other related tasks as required in support of engineering, testing, and production for the program. This position requires an active SECRET Security clearance to start. No dual citizenship. Essential Functions: * Electrical...